COMMERCIAL STEEL EXIT SIGN RED LED BATTERY BACKUP
Download Steel Commercial Exit Sign Red LED Battery Backup Exit Sign Cut Sheet
PRODUCT OVERVIEW
The TES-STX series of commercial exit signs feature an attractive,
contemporary steel housing design. Ideal for commercial and
institutional installations, the slim profile of this sign blends
perfectly with current interior decors. The TES-STX comes standard
configured with high-output LED technology. Available in both
AC only and Self-powered versions.
EXTERNAL SPECIFICATIONS
The TES-STX series is constructed from durable 20 gauge steel. The
TES-STX comes standard with a white baked powder coat finish.
Available in custom epoxy-based powder coat finishes (please
specify). Single, double or universal face versions must be
specified. Universal mounting pattern and key hole slots are
stamped into the back plate. Removeable chevron arrows are
standard on each fixture. The self-powered version comes
standard with an external LED status indicator and test switch.
INTERNAL SPECIFICATIONS
AC ONLY: standard 120/277VAC input
SELF-POWERED: standard self-powered versions use sealed
nickel-cadmium batteries to provide a minimum 90 minutes of
emergency duration. Optional 120 minute duration battery is
available. Solid state charger and transfer.
INSTALLATION
The TES-STX exit is suitable for surface ceiling, wall and end mounting.
Suitable for indoor installations on normally inflammable
surfaces.
MODERN DESIGN
The modern and thin design of the TES-STX series exit provides a
clean and attractive appearance. The 20 gauge steel frame
contains no external holes or slots adding to the clean look
while eliminating unwanted light leaks. The 20 gauge steel
forms a rigid and durable frame that can be securely mounted
in any application. The face and back plates are mounted into
the frame using a channel system that permits simple and
speedy removal during installation.
ELECTRICAL SPECIFICATIONS
The TES-STX series is configured with high-output LED lamps. LED
is standard with 120/277VAC input. All LED versions consume
only 1.1W nominal power. Optional emergency illumination is
provided by the LED light source at the following wattages:
6VDC - 0.5 Watts
12VDC - 1.5 Watts
24VDC - 3.5 Watts
MECHANICAL SPECIFICATIONS
The TES-STX is constructed of durable 20 gauge steel. Universal
mounting pattern and key hole slots are stamped on the back
plate. Surface mount conduit entry knockouts are also provided.
Field removeable directional chevron arrows are standard.
The TES-STX is supplied standard with an attractive and
durable white, baked powder coat finish. Other colors are
available, including custom color matching, please specify. The
advanced design of the TES-STX leaves it with no extraneous holes
or slots, thereby eliminating unwanted light leaks. A simple
and sturdy channel design securely holds the face and back
plates into the frame providing quick and trouble-free field installations
SELF POWERED VERSIONS
The TES-STX-BB self-powered series is designed to operate on battery
power in the event of a regular / mains power failure. Both
the battery and charger are completely contained within the
standard enclosure. There are no external components and no
alterations made to the external dimmensions of the standard
sign. The TES-STX-BB self-powered series utilize a solid state transformer
technology that eliminates the possibility of relay failure
due to particle build up on the relay. Status is easily determined
via an LED that indicates AC-ON. A push button test
switch allows maintenance personnel to quickly confirm the
operational status of the exit on AC fail.
BATTERY TECHNOLOGY
The TES-STX-BB is designed with a maintenance free, sealed Nickel-
Cadmium battery providing a minimum emergency duration of
90 minutes. An optional 120 minute Nickel-Cadmium battery is
available. Recharge time of the battery is twenty-four (24)
hours. The maximum battery working temperature is 50 C.
WARRANTY
The TES-STX comes from the factory with an unconditional 5 year
product warranty.
Cart | My Account | Check Out 
