SPECIFICATION GRADE DIE CAST LED EXIT SIGN -- WITH 6 V, 10.8 WATT REMOTE CAPACITY

PRODUCT OVERVIEW

The RCX Remote Series is ideal for locations that require an attractive, reliable and economical exit sign, plus desire the added benefit of remote capability. The RCX Remote Series is ideal for locations that require an attractive, reliable and economical exit sign, plus desire the added benefit of remote capability.

ILLUMINATION

Illumination of the exit stencil face is accomplished with long lasting, high output Light Emitting Diodes (LEDs). Hot spots and striations are eliminated by the internal light chamber especially designed around the high performance LED array.

HOUSING

Two-piece construction from heavy duty die cast aluminum alloy. Standard housing finish incorporates black or white epoxy-based powder coat paint. Standard stencil face finish for the black housing is brushed aluminum. A matching white stencil face is standard for the white housing. NFPA-type chevrons are field selectable and brushed smooth after insertion to prevent unattractive sight lines. The mounting canopy is constructed from heavy duty die cast aluminum alloy and is painted to match frame color. The RCX Series housing can be wall mounted without the use of a mounting canopy. Provisions are available via universal knockouts for direct mounting to a recessed junction box. Knockouts allow top or end mounting of product utilizing matching canopy.

ELECTRONICS

Emergency Operation
Dual voltage 120/277 VAC input with surge protection is standard. All components are located within the exit housing. An indicator light is located on the bottom of the housing to signify that AC utility is present. AC lockout prevents battery drain prior to the initial energizing of utility power. The low voltage disconnect (LVD) feature will disconnect the battery prior to an unacceptable deep discharge, but not before the required 90 minute emergency operation. The brownout protection circuitry will automatically switch the unit into the emergency mode if the utility voltage sags below 20% of nominal. Battery charging circuitry is entirely solidstate, and of a constant current design. Battery recharge time after a complete discharge is less than the required UL 924 standard. Solid-state circuitry causes an instantaneous transfer to battery power if either the loss of AC utility, or a brownout condition is detected. When line voltage is present and stabilized, the transfer circuitry switches back to normal operation and begins recharging the battery. The transfer circuitry can be tested via a momentary test switch located on the bottom of the housing.

BATTERY

A maintenance free, sealed lead calcium battery is standard. Construction is of the sintered plate design and the battery assembly is equipped with a quick connect plug assembly for easy installation. Standard sustained emergency operation is for 90 minutes with the LED illumination source providing full light output. The suggested operating temperature range of 65°F (19°C) to 85°F (30°C) and should provide a service life of 5 years.

CODE COMPLIANCE

UL 924 listed

UL damp location listing (Consult factory for availability)

Complies with NFPA 101, NEC, BOCA, OSHA illumination standards

WARRANTY

Three year full electronics warranty

Five year full plus five year prorated battery warranty

ELECTRICAL SPECIFICATIONS

Input power requirements

Red = 10.4 watts (120 VAC), 10.8 watts (277 VAC)

Green = 9.8 watts (120 VAC), 10.8 watts (277 VAC)

Remote Capability

Max. Remote Load - 10.8 watts

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.