LOW VOLTAGE TRANSFER CIRCUIT, 12 VOLT, 75-WATT OUTPUT CIRCUITS

PRODUCT OVERVIEW

The Low Voltage Transfer Circuit is designed to allow the user to combine their existing low voltage lighting with a 12 VDC emergency unit power pack. The low voltage lighting may continue to be controlled by a wall switch or dimmer control for normal usage. In the event of utility power failure, the Low Voltage Transfer Circuit will allow the 12 volt emergency power unit to supply power directly to the lamps of the low voltage lighting fixture.

ILLUMINATION

The Low Voltage Transfer Circuit is a two channel device providing switching for up to 75 watts per channel.

TRANSFER CIRCUITRY

Unit shall have two channels capable of switching up to 75 watts each.

INSTALLATION

Two #8 sheet metal screws are provided for mounting the Low Voltage Transfer Module. Three knockouts are provided for the attachment of conduit. A grounding lead is supplied inside the housing. The LVTC is listed for use in insulated ceilings (IC Rated).

HOUSING

Housing and cover are constructed of 20 gauge galvanized steel. Three knockouts for conduit attachment are provided. A grounding lead is provided inside the housing.

ELECTRONICS

Load
Reverse Polarity protected with low battery voltage disconnect.

Special Requirements
Determine the maximum wattage draw of the downlight fixture and be certain that the 12 VDC emergency supply unit equipment is capable of sustaining that load for a minimum of 90 minutes as required by code.

OPERATING TEMPERATURE RANGE

32°F (0°C) to 122°F (50°C)

CODE COMPLIANCE

Listed for Insulated Ceiling Systems (IC Rated)

Damp location listing standard 32°F (0°C) to 122°F (50°C)

ETL Listed to UL 924 standards

ELECTRICAL SPECIFICATIONS

Input Power Requirements at 12 VAC

.72 Watts

Output Power Requirements at 12 VDC

2 channel at 75 watt maximum each

WARRANTY

Three year full warranty

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.